1. Open the Water Tap
Ensure that the water tap is open before starting the setup process.
2. Activate the Appliance
Press the on/off button to turn on the dishwasher. The appliance should be in setting mode.
3. Fill the Salt Container
If the salt indicator is on, fill the salt container. Turn the cap counterclockwise to open it, add 1 litre of water for the first time, then fill it with dishwasher salt. Remove any excess salt around the opening and close the cap by turning it clockwise.
4. Fill the Rinse Aid Dispenser
If the rinse aid indicator is on, fill the rinse aid dispenser using only rinse aid for dishwashers. This helps in drying the dishes without streaks and stains.
5. Adjust the Water Softener
Set the water softener to match the water hardness in your area. Consult your local water authority for this information. This ensures the proper use of dishwasher salt and water.
6. Start a Cleaning Programme
Start a programme to remove any processing residues from the appliance. Do not use detergent and do not load the baskets during this initial run.